HPE FlexNetwork 7500 Series Command Reference Manual page 157
Network management and monitoring
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (597 pages) ,
- Network management and monitoring command reference (430 pages) ,
- Command reference manual (376 pages)
Table of Contents
Advertisement
Parameters
pse-id: Specifies a PSE by its ID. If you do not specify a PSE, this command displays detailed PSE
information about all PSEs.
Usage guidelines
Only the default MDC supports this command.
Examples
# Display detailed PSE information.
<Sysname> display poe pse
PSE ID
Slot NO.
PSE Model
PSE Status
PSE Preempted
Power Priority
Current Power
Average Power
Peak Power
Max Power
Remaining Guaranteed Power
PSE CPLD Version
PSE Software Version
PSE Hardware Version
Legacy PD Detection
Power Utilization Threshold
PSE Power Policy
PD Power Policy
PD Disconnect-Detection Mode
Table 28 Command output
Field
PSE ID
SSlot No.
PSE Status
Preempted
Power Priority
Current Power
Average Power
Peak Power
Max Power
: 1
: 0
: LSQ1GV48SD0
: Enabled
: No
: Low
: 130
: 20
: 240
: 200
: 120
: 100
: 200
: 100
: Disabled
: 80
: Disabled
: Disabled
: DC
Description
ID of the PSE.
Sublsot number of the PSE.
PoE status of the PSE:
•
Enabled.
•
Disabled.
Power preemption status for the PSE:
•
No—The system has sufficient power for the PSE.
•
Yes—The system has supplied power to other PSEs and does not
have sufficient power for this PSE.
Power priority of the PSE.
Current power of the PSE.
Average power of the PSE.
Peak power of the PSE.
Maximum power of the PSE.
147
W
W
W
W
W
Advertisement
Table of Contents
