Xml - HPE FlexNetwork 7500 Series Command Reference Manual
Network management and monitoring
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (597 pages) ,
- Network management and monitoring command reference (430 pages) ,
- Command reference manual (376 pages)
Table of Contents
Advertisement
Syntax
netconf ssh server port port-number
undo netconf ssh server port
Default
The device uses port 830 to listen for NETCONF over SSH session requests.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
port-number: Specifies a port by its number in the range of 1 to 65535.
Usage guidelines
Make sure the specified port is not being used by other services.
Examples
# Use port 800 to listen for NETCONF over SSH session requests.
<Sysname> system-view
[Sysname] netconf ssh server port 800
xml
Use xml to enter XML view.
Syntax
xml
Views
User view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Usage guidelines
In XML view, use NETCONF messages to configure the device or obtain data from the device. The
NETCONF operations you can perform depend on the user roles you have, as shown in
Table 53 NETCONF operations available for the predefined user roles
User role
network-admin
mdc-admin
NETCONF operations
All NETCONF operations
238
Table
53.
Advertisement
Table of Contents
