Netconf Soap Enable - HPE FlexNetwork 7500 Series Command Reference Manual
Network management and monitoring
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (597 pages) ,
- Network management and monitoring command reference (430 pages) ,
- Command reference manual (376 pages)
Table of Contents
Advertisement
undo netconf soap https dscp
Default
The DSCP value is 0 for outgoing NETCONF over SOAP packets.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
dscp-value: Specifies a DSCP value in the range of 0 to 63. A larger DSCP value represents a higher
priority.
http: Specifies NETCONF over SOAP over HTTP packets.
https: Specifies NETCONF over SOAP over HTTPS packets.
Usage guidelines
The DSCP value of an IP packet specifies the priority level of the packet and affects the transmission
priority of the packet.
Examples
# Set the DSCP value to 30 for outgoing NETCONF over SOAP over HTTP packets.
<Sysname> system-view
[Sysname] netconf soap http dscp 30
netconf soap enable
Use netconf soap enable to enable NETCONF over SOAP.
Use undo netconf soap enable to disable NETCONF over SOAP.
Syntax
In non-FIPS mode:
netconf soap { http | https } enable
undo netconf soap { http | https } enable
In FIPS mode:
netconf soap https enable
undo netconf soap https enable
Default
NETCONF over SOAP is disabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
236
Advertisement
Table of Contents
