Cwmp Acs Default Url - HPE FlexNetwork 7500 Series Command Reference Manual

Usage guidelines
You can configure only one password for authentication to the default ACS URL. If you execute this
command multiple times, the most recent configuration takes effect.
For a successful connection, make sure the CPE has the same username and password settings as
the ACS.
Examples
# Configure the password used for authentication to the default ACS URL.
<Sysname> system-view
[Sysname] cwmp
[Sysname-cwmp] cwmp acs default password simple newpsw
Related commands

cwmp acs default url

cwmp acs default username
cwmp acs default url
Use cwmp acs default url to specify a default ACS URL.
Use undo cwmp acs default url to restore the default.
Syntax
cwmp acs default url url
undo cwmp acs default url
Default
No default ACS URL is specified.
Views
CWMP view
Predefined user roles
network-admin
mdc-admin
Parameters
url: Specifies the default ACS URL, a string of 8 to 255 characters. The URL must use the
http://host[:port]/path or https://host[:port]/path format.
Usage guidelines
The CPE attempts to connect to the default ACS URL if no ACS URL has been assigned to it through
the cwmp acs url command or DHCP.
You can configure only one default ACS URL. If you execute this command multiple times, the most
recent configuration takes effect.
Examples
# Specify the default ACS URL.
<Sysname> system-view
[Sysname] cwmp
[Sysname-cwmp] cwmp acs default url http://www.acs.com:80/acs
439