Poe Priority (System View) - HPE FlexNetwork 7500 Series Command Reference Manual

PoE profile view
Predefined user roles
network-admin
mdc-admin
Parameters
critical: Sets the power supply priority to critical. The PI with critical power priority operates in
guaranteed mode. Power is first supplied to the PD connected to the critical PI.
high: Sets the power supply priority to high.
low: Sets the power supply priority to low.
Usage guidelines
When the PoE power is insufficient, power is first supplied to PIs with higher priority.
For PIs with same power supply priority, the PI with the smallest ID is allocated with power first.
If a PoE profile has been applied to a PI, remove the application before configuring the PI in PoE
profile view.
If a PI has been configured, remove the configuration before configuring the PI in PI view.
Examples
# Set the power supply priority of the PI to critical in PI view.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] poe priority critical
# Set the power supply priority of the PI to critical in PoE profile view.
<Sysname> system-view
[Sysname] poe-profile abc
[Sysname-poe-profile-abc-1] poe priority critical
[Sysname-poe-profile-abc-1] quit
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] apply poe-profile name abc
Related commands
poe pd-policy priority

poe priority (system view)

Use poe priority to set the power supply priority for a PSE.
Use undo poe priority to restore the default.
Syntax
poe priority { critical | high | low } pse pse-id
undo poe priority pse pse-id
Default
The power supply priority of a PSE is low.
Views
System view
161