HPE FlexNetwork 7500 Series Command Reference Manual page 425

Test name : BoardStatusMonitor
Test attributes : **M*PA
Test interval : 01:00:00
Min interval : 00:00:06
Correct-action : -NA-
Description : A Real-time test, enabled by default that checks board status
between local master and other local boards.
Exec : -NA-
Test name : TaskMonitor
Test attributes : **M*PA
Test interval : 00:00:10
Min interval : 00:00:10
Correct-action : -NA-
Description : A Real-time test, enabled by default that checks the important
tasks.
Exec : -NA-
Test name : PortMonitor
Test attributes : **M*PA
Test interval : 00:00:10
Min interval : 00:00:10
Correct-action : -NA-
Description : A Real-time test, enabled by default that checks port status
for each inner port.
Exec : -NA-
Test name : ComponentMonitor
Test attributes : **M*PA
Test interval : 00:00:30
Min interval : 00:00:10
Correct-action : -NA-
Description : A Real-time test, enabled by default that checks component status.
Exec : -NA-
Table 92 Command output
Field Description
B/* Boot-up/Not boot-up.
O/* On-demand/Not on-demand.
M/* Monitoring/Not monitoring.
D/* Disruptive/Non-disruptive.
P/* Port-related/Not port-related.
A/I/* Active and monitoring/Inactive and monitoring/Not monitoring.
Test name Name of the diagnostic test.
Attributes of the diagnostic test. The characters from left to right indicate whether or not
Test attributes the test is boot-up, on-demand, monitoring, disruptive, port-related, or active. The
asterisks (*) indicate that the test does not have the corresponding attributes.
415