Display Rmon Prialarm - HPE FlexNetwork 7500 Series Command Reference Manual
Network management and monitoring
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (597 pages) ,
- Network management and monitoring command reference (430 pages) ,
- Command reference manual (376 pages)
Table of Contents
Advertisement
Related commands
rmon history
display rmon prialarm
Use display rmon prialarm to display information about RMON private alarm entries.
Syntax
display rmon prialarm [ entry-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
entry-number: Specifies an alarm entry index in the range of 1 to 65535. If you do not specify an entry,
the command displays all private alarm entries.
Examples
# Display information about all RMON private alarm entries.
<Sysname> display rmon prialarm
PrialarmEntry 1 owned by user1 is VALID.
Sample type
Variable formula
Description
Sampling interval (in seconds) : 10
Rising threshold
Falling threshold
Alarm sent upon entry startup
Entry lifetime
Latest value
Table 50 Command output
Field
PrialarmEntry entry-number
owned by owner is status.
: absolute
: (.1.3.6.1.2.1.16.1.1.1.6.1*100/.1.3.6.1.2.1.16.1.1.1.5.1)
: ifUtilization.Ten-GigabitEthernet1/0/1
: 80(associated with event 1)
: 5(associated with event 2)
: risingOrFallingAlarm
: forever
: 85
Description
Alarm entry owner and status:
•
entry-number—Alarm entry index.
•
owner—Entry owner.
•
status—Entry status:
VALID—The entry is valid.
UNDERCREATION—The entry is invalid.
The status field is not configurable at the CLI. All alarm entries created from
the CLI are valid by default.
The display rmon prialarm command can display invalid entries, but the
display current-configuration and display this commands do not display
their settings.
220
Advertisement
Table of Contents
