HPE FlexNetwork 7500 Series Command Reference Manual page 176
Network management and monitoring
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (597 pages) ,
- Network management and monitoring command reference (430 pages) ,
- Command reference manual (376 pages)
Table of Contents
Advertisement
If you do not specify a profile index, the system automatically assigns an index (starting from 1) to the
PoE profile.
If a PoE profile is applied, use the undo apply poe-profile command to remove the application
before deleting the PoE profile.
Examples
# Create a PoE profile, name it abc, and specify the index number as 3.
<Sysname> system-view
[Sysname] poe-profile abc 3
[Sysname-poe-profile-abc-3]
# Create a PoE profile and name it def. Do not specify the index number.
<Sysname> system-view
[Sysname] poe-profile def
[Sysname-poe-profile-def-1]
Related commands
apply poe-profile
poe enable
poe max-power
poe mode
poe priority
166
Advertisement
Table of Contents
