HPE FlexNetwork 7500 Series Command Reference Manual page 345

Field
Type DstIP(Port)
Pro ToS VNI If(Direct) Pkts
DstMAC(VLAN) SrcMAC(VLAN)
TopLblType(IP/Mask)
Description
Statistics of the active flows in the current cache:
•
Flow type. Flows are classified into the following types:





•
Destination IP address (destination port).
•
Source IP address (source port).
•
Protocol number.
SrcIP(Port)
•
ToS.
•
VXLAN ID. The VNI field displays N/A for non-VXLAN
packets and on VXLAN-incapable devices.
•
Interface name (direction).
•
Number of packets.
ICMP packets do not contain port number fields, so the type and
code fields are captured. The value for the destination port
represents these two fields:
•
The highest 8 bits represent the type field.
•
The lowest 8 bits represent the code field.
The value for the source port is set to 0 and does not indicate any
statistics.
Layer 2 information of the active flows in the current cache:
•
Destination MAC address.
•
Destination VLAN ID.
•
Source MAC address.
•
Source VLAN ID.
This field is not supported in the current software version.
Information about the active MPLS flows in the current cache:
•
Type of the labels at the top of the label stack:
Lbl-Exp-S-List


•
Label list.
Up to three labels can be listed in one label list.
335
Layer 3 flows.
Layer 2 flows.
Layer 2 and Layer 3 flows.
MPLS flows without IP options. This field is not
supported in the current software version.
MPLS flows with IP options. This field is not supported in
the current software version.
IP address associated with the label.
Mask associated with the label.