HPE FlexNetwork 7500 Series Command Reference Manual page 321

Syntax
In standalone mode:
process core { maxcore value | off } { job job-id | name process-name } [ slot slot-number [ cpu
cpu-number ] ]
In IRF mode:
process core { maxcore value | off } { job job-id | name process-name } [ chassis chassis-number
slot slot-number [ cpu cpu-number ] ]
Views
User view
Default
A process generates a core file for the first exception and does not generate any core files for
subsequent exceptions.
Predefined user roles
network-admin
mdc-admin
Parameters
off: Disables core file generation.
maxcore value: Enables core file generation and sets the maximum number of core files, in the
range of 1 to 10.
name process-name: Specifies a process by its name, a case-insensitive string of 1 to 15
characters.
job job-id: Specifies a process by its job ID, in the range of 1 to 2147483647. The job ID does not
change after the process restarts.
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command
enables or disables core file generation for a process and sets the maximum number of core files on
the active MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command displays
information for the global active MPU. (In IRF mode.)
cpu cpu-number: Specifies a CPU by its number.
Usage guidelines
The command applies to all instances of a process.
The command enables the system to generate a core file each time the specified process crashes
until the maximum number of core files is reached. A core file records the exception information.
Because the core files consume system storage resources, you can disable core file generation for
processes for which you do not need to review exception information.
Examples
# Disable core file generation for process routed.
<Sysname> process core off name routed
# Enable core file generation for process routed and set the maximum number of core files to 5.
<Sysname> process core maxcore 5 name routed
Related commands
display exception context
311