Poe Max-Power - HPE FlexNetwork 7500 Series Command Reference Manual
Network management and monitoring
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (597 pages) ,
- Network management and monitoring command reference (430 pages) ,
- Command reference manual (376 pages)
Table of Contents
Advertisement
Predefined user roles
network-admin
mdc-admin
Parameters
pse pse-id: Specifies a PSE by its ID.
Usage guidelines
Only the default MDC supports this command.
Examples
# Enable PSE 4 to detect nonstandard PDs.
<Sysname> system-view
[Sysname] poe legacy enable pse 4
Related commands
display poe pse
poe max-power
Use poe max-power to set the maximum PI power.
Use undo poe max-power to restore the default.
Syntax
poe max-power max-power
undo poe max-power
Default
The maximum PI power is 30000 milliwatts.
Views
PI view
PoE profile view
Predefined user roles
network-admin
mdc-admin
Parameters
max-power: Sets the maximum PI power in milliwatts. The value is an integer in the range of 1000 to
30000.
Examples
# Set the maximum PI power to 12000 milliwatts in PI view.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] poe max-power 12000
# Set the maximum PI power to 12000 milliwatts in PoE profile view.
<Sysname> system-view
[Sysname] poe-profile abc
[Sysname-poe-profile-abc-1] poe max-power 12000
156
Advertisement
Table of Contents
