Snmp-Agent Target-Host - HPE FlexNetwork 7500 Series Command Reference Manual

snmp-agent sys-info version v3
undo snmp-agent sys-info version v3
Default
SNMPv3 is enabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
all: Specifies SNMPv1, SNMPv2c, and SNMPv3.
v1: Specifies SNMPv1.
v2c: Specifies SNMPv2c.
v3: Specifies SNMPv3.
Usage guidelines
SNMPv1 and SNMPv2c settings in this command are not supported in FIPS mode.
Configure the SNMP agent with the same SNMP version as the NMS for successful communications
between them.
Examples
# Enable SNMPv3.
<Sysname> system-view
[Sysname] snmp-agent sys-info version v3
Related commands
display snmp-agent sys-info

snmp-agent target-host

Use snmp-agent target-host to configure an SNMP notification target host.
Use undo snmp-agent target-host to remove an SNMP notification target host.
Syntax
In non-FIPS mode:
snmp-agent target-host inform address udp-domain { ipv4-address | ipv6 ipv6-address }
[ udp-port port-number ] [ vpn-instance vpn-instance-name ] params securityname security-string
{ v2c | v3 [ authentication | privacy ] }
snmp-agent target-host trap address udp-domain { ipv4-address | ipv6 ipv6-address } [ udp-port
port-number ] [ vpn-instance vpn-instance-name ] params securityname security-string [ v1 | v2c
| v3 [ authentication | privacy ] ]
undo snmp-agent target-host { trap | inform } address udp-domain { ipv4-address | ipv6
ipv6-address } params securityname security-string [ vpn-instance vpn-instance-name ]
In FIPS mode:
snmp-agent target-host inform address udp-domain { ipv4-address | ipv6 ipv6-address }
[ udp-port port-number ] [ vpn-instance vpn-instance-name ] params securityname security-string
v3 { authentication | privacy }
200