HPE FlexNetwork 7500 Series Command Reference Manual page 461

Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Examples
# Display the CWMP configuration after CWMP is enabled.
<Sysname> display cwmp configuration
CWMP state
ACS URL
ACS username
ACS default URL
ACS default username
Periodic inform
Inform interval
Inform time
Wait timeout
Connection retries
Source IP interface
STUN state
SSL policy name
Table 100 Command output
Field
CWMP state
ACS URL
ACS username
ACS default URL
ACS default username
Periodic inform
Inform interval
Inform time
Wait timeout
Connection retries
: Enabled
: http://www.acs.com:80/acs
: newname
: Null
: defname
: Disabled
: 600s
: None
: 30s
: Unlimited
: None
: Disabled
: Null
Description
Status of CWMP: Enabled or Disabled.
Preferred ACS URL.
This field displays Null if no preferred ACS URL has been specified.
Username for the CPE to authenticate to the ACS. This field displays Null if no
username has been configured for authentication to the preferred ACS URL.
Default ACS URL.
This field displays Null if no default ACS URL has been configured.
Username for the CPE to authenticate to the default ACS URL.
This field displays Null if no username has been configured for authentication
to the default ACS URL.
Status of the periodic Inform feature: Enabled or Disabled.
Periodic Inform interval. The default interval is 600 seconds.
Date and time at which an Inform message is scheduled to be sent. If you do
not schedule an Inform sending, this field displays None.
Close-wait timer. This timer is configurable with the cwmp cpe wait timeout
command.
Number of attempts the CPE can make to retry a failed CWMP connection.
This field displays Unlimited if the default setting is used. The CPE retries a
failed session until the session is established with the ACS.
451