Rmon Event - HPE FlexNetwork 7500 Series Command Reference Manual

[Sysname] rmon alarm 1 1.3.6.1.2.1.16.1.1.1.4.1 10 absolute rising-threshold 5000 1
falling-threshold 5 2 owner user1
In this example, you can replace 1.3.6.1.2.1.16.1.1.1.4.1 with etherStatsOctets.1, where 1 is the
statistics entry index for the interface. If you execute the rmon statistics 5 command, you can use
etherStatsOctets.5 to replace 1.3.6.1.2.1.16.1.1.1.4.5.
Related commands
display rmon alarm

rmon event

rmon event
Use rmon event to create an RMON event entry.
Use undo rmon event to remove an RMON event entry.
Syntax
rmon event entry-number [ description string ] { log | log-trap security-string | none | trap
security-string } [ owner text ]
undo rmon event entry-number
Default
No RMON event entries exist.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
entry-number: Specifies an event entry index in the range of 1 to 65535.
description string: Configures an event description, a case-sensitive string of 1 to 127 characters.
log: Logs the event .
log-trap: Logs the event and sends an SNMP notification.
security-string: Specifies the SNMP community name carried in the SNMP notifications. The
security-string argument is a case-sensitive string of 1 to 127 characters and is determined by the
SNMP configuration. This argument is supported but does not take effect in the current software
version.
none: Performs no action.
trap: Sends an SNMP notification.
owner text: Specifies the entry owner, a case-sensitive string of 1 to 127 characters.
NOTE:
The SNMP community name setting for the security-string argument does not take effect even
though you can configure it with the command. Instead, the system uses the settings you configure
with SNMP when it sends RMON SNMP notifications. For more information about SNMP
notifications, see Network Management and Monitoring Configuration Guide.
225