HPE FlexNetwork 7500 Series Command Reference Manual page 219
Network management and monitoring
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (597 pages) ,
- Network management and monitoring command reference (430 pages) ,
- Command reference manual (376 pages)
Table of Contents
Advertisement
snmp-agent usm-user v3 user-name group-name [ remote { ipv4-address | ipv6 ipv6-address }
[ vpn-instance vpn-instance-name ] ] [ { cipher | simple } authentication-mode { md5 | sha }
auth-password [ privacy-mode { 3des | aes128 | aes192 | aes256 | des56 } priv-password ] ] [ acl
{ ipv4-acl-number | name ipv4-acl-name } | acl ipv6 { ipv6-acl-number | name ipv6-acl-name } ] *
undo snmp-agent usm-user v3 user-name { local | engineid engineid-string | remote
{ ipv4-address | ipv6 ipv6-address } [ vpn-instance vpn-instance-name ] }
•
In RBAC mode:
snmp-agent usm-user v3 user-name user-role role-name [ remote { ipv4-address | ipv6
ipv6-address } [ vpn-instance vpn-instance-name ] ] [ { cipher | simple } authentication-mode
{ md5 | sha } auth-password [ privacy-mode { 3des | aes128 | aes192 | aes256 | des56 }
priv-password ] ] [ acl { ipv4-acl-number | name ipv4-acl-name } | acl ipv6 { ipv6-acl-number | name
ipv6-acl-name } ] *
undo snmp-agent usm-user v3 user-name { local | engineid engineid-string | remote
{ ipv4-address | ipv6 ipv6-address } [ vpn-instance vpn-instance-name ] }
In FIPS mode:
•
In VACM mode:
snmp-agent usm-user v3 user-name group-name [ remote { ipv4-address | ipv6 ipv6-address }
[ vpn-instance vpn-instance-name ] ] { cipher | simple } authentication-mode sha auth-password
[ privacy-mode { aes128 | aes192 | aes256 } priv-password ] [ acl { ipv4-acl-number | name
ipv4-acl-name } | acl ipv6 { ipv6-acl-number | name ipv6-acl-name } ] *
undo snmp-agent usm-user v3 user-name { local | engineid engineid-string | remote
{ ipv4-address | ipv6 ipv6-address } [ vpn-instance vpn-instance-name ] }
•
In RBAC mode:
snmp-agent usm-user v3 user-name user-role role-name [ remote { ipv4-address | ipv6
ipv6-address } [ vpn-instance vpn-instance-name ] ] [ { cipher | simple } authentication-mode
sha auth-password [ privacy-mode { aes128 | aes192 | aes256 } priv-password ] ] [ acl
{ ipv4-acl-number | name ipv4-acl-name } | acl ipv6 { ipv6-acl-number | name ipv6-acl-name } ] *
undo snmp-agent usm-user v3 user-name { local | engineid engineid-string | remote
{ ipv4-address | ipv6 ipv6-address } [ vpn-instance vpn-instance-name ] }
Default
No SNMPv3 users exist.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
user-name: Specifies an SNMPv3 username, a case-sensitive string of 1 to 32 characters.
group-name: Specifies an SNMPv3 group name, a case-sensitive string of 1 to 32 characters. The
group can be one that has been created or not. The user takes effect only after you create the group.
user-role role-name: Specifies a user role name, a case-sensitive string of 1 to 63 characters.
remote { ipv4-address | ipv6 ipv6-address }: Specifies a target host by its IPv4 or IPv6 address,
typically the NMS, to receive the notifications. To send SNMPv3 notifications to a target host, you
need to specify this option and use the snmp-agent remote command to bind the IPv4 or IPv6
address to the remote engine ID.
209
Advertisement
Table of Contents
