Display Process - HPE FlexNetwork 7500 Series Command Reference Manual

display process

Use display process to display process state information.
Syntax
In standalone mode:
display process [ all | job job-id | name process-name ] [ slot slot-number [ cpu cpu-number ] ]
In IRF mode:
display process [ all | job job-id | name process-name ] [ chassis chassis-number slot slot-number
[ cpu cpu-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
all: Specifies all processes. With the all keyword or without any parameters, the command displays
state information for all processes.
job job-id: Specifies a process by its job ID, in the range of 1 to 2147483647. Each process has a
fixed job ID.
name process-name: Specifies a process by its name, a case-insensitive string of 1 to 15 characters
that must not contain question marks or spaces.
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command
displays process state information for the active MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command displays
information for the global active MPU. (In IRF mode.)
cpu cpu-number: Specifies a CPU by its number.
Examples
# Display state information for the process scmd.
<Sysname> display process name scmd
Job ID: 1
Parent JID: 0
Parent PID: 0
Executable path: /sbin/scmd
Instance: 0
Respawn: OFF
Respawn count: 1
Max. spawns per minute: 0
Last started: Wed Jun
Process state: sleeping
PID: 1
1 14:45:46 2013
284