HPE FlexNetwork 7500 Series Command Reference Manual page 338
Network management and monitoring
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (597 pages) ,
- Network management and monitoring command reference (430 pages) ,
- Command reference manual (376 pages)
Table of Contents
Advertisement
vlan-id: Specifies a VLAN by its ID.
Usage guidelines
You can configure remote probe VLANs only for remote source groups and remote destination
groups.
When a VLAN is configured as a remote probe VLAN, use the VLAN for port mirroring exclusively.
The remote mirroring groups on the source device and destination device must use the same remote
probe VLAN.
Only a static VLAN that already exists can be configured as a remote probe VLAN. A VLAN can be
configured as the remote probe VLAN for only one mirroring group.
To delete a VLAN that is configured as a remote probe VLAN, remove the remote probe VLAN
configuration first.
Examples
# Create remote source group 1 and configure VLAN 10 as its remote probe VLAN.
<Sysname> system-view
[Sysname] mirroring-group 1 remote-source
[Sysname] mirroring-group 1 remote-probe vlan 10
# Create remote destination group 2 and configure VLAN 20 as its remote probe VLAN.
<Sysname> system-view
[Sysname] mirroring-group 2 remote-destination
[Sysname] mirroring-group 2 remote-probe vlan 20
Related commands
mirroring-group
328
Advertisement
Table of Contents
