Cwmp Cpe Password - HPE FlexNetwork 7500 Series Command Reference Manual

Default
No connection initiation has been scheduled.
Views
CWMP view
Predefined user roles
network-admin
mdc-admin
Parameters
time: Specifies the time at which the CPE sends an Inform message. The time format is
yyyy-mm-ddThh:mm:ss, and the value range is 1970-01-01T00:00:00 to 2035-12-31T23:59:59. The
specified time must be greater than the current system time.
Examples
# Configure the CPE to send an Inform message at 2007-12-01T20:00:00.
<Sysname> system-view
[Sysname] cwmp
[Sysname-cwmp] cwmp cpe inform time 2012-12-01T20:00:00

cwmp cpe password

Use cwmp cpe password to configure the password for the CPE to authenticate the ACS.
Use undo cwmp cpe password to restore the default.
Syntax
cwmp cpe password { cipher | simple } string
undo cwmp cpe password
Default
No password is configured for authenticating the ACS.
Views
CWMP view
Predefined user roles
network-admin
mdc-admin
Parameters
cipher: Specifies a password in encrypted form.
simple: Specifies a password in plaintext form. For security purposes, the password specified in
plaintext form will be stored in encrypted form.
string: Specifies the password. Its plaintext form is a case-sensitive string of 1 to 255 characters. Its
encrypted form is a case-sensitive string of 33 to 373 characters.
Usage guidelines
You can configure only one password for the ACS to authenticate to the CPE when it initiates a
connection. If you execute this command multiple times, the most recent configuration takes effect.
For a successful connection, make sure the ACS has the same username and password settings as
the CPE.
446