HPE FlexNetwork 7500 Series Command Reference Manual page 318

Parameters
dumbtty: Specifies dumbtty mode. In this mode, the command displays all thread statistics in
descending order of CPU usage without refreshing statistics. If you do not specify the keyword, the
command displays statistics for top 10 processes in descending order of CPU usage in an interactive
mode, and refreshes statistics every 5 seconds by default.
iteration number: Specifies the number of display times, in the range of 1 to 4294967295. If you
specify the dumbtty keyword, the number argument is 1 by default. If neither the dumbtty keyword
nor the number argument is specified, there is no limit to the display times.
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command
displays thread statistics for the active MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command displays
information for the global active MPU. (In IRF mode.)
cpu cpu-number: Specifies a CPU by its number.
Usage guidelines
If you do not specify the dumbtty keyword, the command displays thread statistics in an interactive
mode. In this mode, the system automatically determines the number of displayed thread processes
according to the screen size and does not display exceeding processes. You can also input
interactive commands as shown in
Table 74 Interactive commands
Commands
? or h
d
k
l
n
q
<
>
Examples
# Display thread statistics in dumbtty mode.
<Sysname> monitor thread dumbtty
84 processes; 107 threads
Thread states: 1 running, 106 sleeping, 0 stopped, 0 zombie
CPU states: 83.19% idle, 1.68% user, 10.08% kernel, 5.04% interrupt
Memory: 755M total, 417M available, page size 4K
JID
1175 1175
1
881
776
Description
Displays help information that includes available interactive commands.
Sets the interval for refreshing statistics. The default interval is 5 seconds.
Kills a process. Because the command can impact system operation, be cautious when
you use it.
Refreshes the screen.
Changes the maximum number of threads displayed within a screen, in the range of 0
to 2147483647. The default value is 10. A value of 0 means no limit. Only threads not
exceeding the screen size can be displayed.
Quits interactive mode.
Moves sort field to the next left column.
Moves sort field to the next right column.
TID LAST_CPU PRI
0 120
1 0 120
881 0 120
776 0 120
Table 74 to perform relevant operations.
State HH:MM:SS MAX
R 00:00:00
S 00:00:06
S 00:00:09
S 00:00:01
308
CPU Name
1 10.75% top
1 2.68% scmd
1 2.01% diagd
0 0.67% [DEVD]