Rtm Event Syslog Buffer-Size - HPE FlexNetwork 7500 Series Command Reference Manual

Variable name
_subslot
Interface:
_ifname
SNMP:
_oid
_oid_value
SNMP-Notification:
_oid
Process:
_process_name
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
var-name: Specifies a user-defined EAA environment variable by its name, a case-sensitive string of
1 to 63 characters. The name can contain digits, letters, and the underscore sign (_), but its leading
character cannot be the underscore sign.
var-value: Specifies the variable value.
Usage guidelines
When you define an action, you can enter a variable name with a leading dollar sign
($variable_name) instead of entering a value for an argument. EAA will replace the variable name
with the variable value when it performs the action.
For an action argument, you can specify a list of variable names in the form of
$variable_name1$variable_name2...$variable_nameN.
Examples
# Create an environment variable: set its name to if and set its value to interface.
<Sysname> system-view
[Sysname] rtm environment if interface

rtm event syslog buffer-size

Use rtm event syslog buffer-size to set the size for the EAA-monitored log buffer.
Use undo rtm event syslog buffer-size to restore the default.
Syntax
rtm event syslog buffer-size buffer-size
undo rtm event syslog buffer-size
Description
ID of the subslot where subcard hot-swapping occurs. This variable is not
supported by the device.
Interface name.
OID of the MIB variable where an SNMP operation is performed.
Value of the MIB variable.
OID that is included in the SNMP notification.
Process name.
259