Rmon Statistics - HPE FlexNetwork 7500 Series Command Reference Manual

[Sysname] rmon event 1 log
[Sysname] rmon event 2 none
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] rmon statistics 1
[Sysname-Ten-GigabitEthernet1/0/1] quit
[Sysname] rmon prialarm 1 (.1.3.6.1.2.1.16.1.1.1.6.1*100/.1.3.6.1.2.1.16.1.1.1.5.1)
BroadcastPktsRatioOfXGE1/0/1 10 absolute rising-threshold 80 1 falling-threshold 5 2
entrytype forever owner user1
The last number in the OID forms of variables must be the same as the statistics entry index for the
interface. For example, if you execute the rmon statistics 5 command, you must replace
1.3.6.1.2.1.16.1.1.1.6.1
1.3.6.1.2.1.16.1.1.1.5.5, respectively.
Related commands
display rmon prialarm
rmon event

rmon statistics

Use rmon statistics to create an RMON statistics entry.
Use undo rmon statistics to remove an RMON statistics entry.
Syntax
rmon statistics entry-number [ owner text ]
undo rmon statistics entry-number
Default
No RMON statistics entries exist.
Views
Ethernet interface view
Predefined user roles
network-admin
mdc-admin
Parameters
entry-number: Specifies a statistics entry index in the range of 1 to 65535.
owner text: Specifies the entry owner, a case-sensitive string of 1 to 127 characters.
Usage guidelines
Each RMON statistics entry provides a set of cumulative traffic statistics collected up to the present
time for an interface. Statistics include number of collisions, CRC alignment errors, number of
undersize or oversize packets, number of broadcasts, number of multicasts, number of bytes
received, and number of packets received. The statistics are cleared at a reboot.
To display the RMON statistics table, use the display rmon statistics command.
You can create only one RMON statistics entry for an Ethernet interface.
Examples
# Create an RMON statistics entry for Ten-GigabitEthernet 1/0/1. The index is 20 and the owner is
user1.
<Sysname> system-view
and 1.3.6.1.2.1.16.1.1.1.5.1
229
with 1.3.6.1.2.1.16.1.1.1.6.5 and