Flow Mirroring Commands; Mirror-To Cpu; Mirror-To Interface - HPE FlexNetwork 7500 Series Command Reference Manual
Network management and monitoring
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (597 pages) ,
- Network management and monitoring command reference (430 pages) ,
- Command reference manual (376 pages)
Table of Contents
Advertisement
Flow mirroring commands
mirror-to cpu
Use mirror-to cpu to configure a mirroring action that mirrors traffic to the CPU.
Use undo mirror-to cpu to delete the mirroring action that mirrors traffic to the CPU.
Syntax
mirror-to cpu
undo mirror-to cpu
Default
No mirroring action exists to mirror traffic to the CPU.
Views
Traffic behavior view
Predefined user roles
network-admin
mdc-admin
Examples
# Create traffic behavior 1 and configure the action of mirroring traffic to the CPU for the traffic
behavior.
<Sysname> system-view
[Sysname] traffic behavior 1
[Sysname-behavior-1] mirror-to cpu
mirror-to interface
Use mirror-to interface to configure a mirroring action that mirrors traffic to an interface.
Use undo mirror-to interface to delete a mirroring action that mirrors traffic to an interface.
Syntax
mirror-to interface interface-type interface-number
undo mirror-to interface interface-type interface-number
Default
No mirroring actions exist to mirror traffic to interfaces.
Views
Traffic behavior view
Predefined user roles
network-admin
mdc-admin
Parameters
interface-type interface-number: Specifies an interface by its type and number.
329
Advertisement
Table of Contents
