HPE FlexNetwork 7500 Series Command Reference Manual page 178

Role name: bb
Storage-type: nonVolatile
Community name: userv1
Group name: testv1
Storage-type: nonvolatile
Community name: cc
Group name: cc
ACL name: testacl
Storage-type: nonVolatile
Table 33 Command output
Field
Community name
Group name
Role name
ACL
ACL name
Storage-type
Context name
Related commands
snmp-agent community
snmp-agent usm-user { v1 | v2c }
Description
Community name created by using the snmp-agent community
command or username created by using the snmp-agent
usm-user { v1 | v2c } command.
SNMP group name.
•
If the community is created by using the snmp-agent community command in
VACM mode, the group name is the same as the community name.
If the community is created by using the snmp-agent usm-user
{ v1 | v2c } command, the name of the group that has the user is
displayed.
User role name for the community.
If the community is created by using the snmp-agent community command in RBAC
mode, a user role can be bound to the community name.
Number of the ACL.
This field appears only when an ACL is specified for the SNMPv1 or SNMPv2c
community. It is exclusive with the ACL name field.
Name of the ACL.
This field appears only when an ACL is specified for the SNMPv1 or SNMPv2c
community. It is exclusive with the ACL field.
Storage type:
•
volatile—Settings are lost when the system reboots.
•
nonVolatile—Settings remain after the system reboots.
•
permanent—Settings remain after the system reboots and can be modified but
not deleted.
•
readOnly—Settings remain after the system reboots and cannot be modified or
deleted.
•
other—Any other storage type.
SNMP context:
•
If a mapping between the SNMP community and an SNMP context is configured,
the SNMP context is displayed.
•
If no mapping between the SNMP community and an SNMP context exists, this
field is empty.
168