Display Rtm Environment - HPE FlexNetwork 7500 Series Command Reference Manual

mdc-admin
Usage guidelines
You must execute this command for a CLI-defined monitor policy to take effect.
After changing the settings in a policy that has been enabled, you must re-execute this command for
the changes to take effect.
Examples
# Enable CLI-defined monitor policy test.
<Sysname> system-view
[Sysname] rtm cli-policy test
[Sysname-rtm-test] commit

display rtm environment

Use display rtm environment to display user-defined EAA environment variables and their values.
Syntax
display rtm environment [ var-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
var-name: Specifies a user-defined EAA environment variable by its name, a case-sensitive string of
1 to 63 characters. The name can contain digits, letters, and the underscore sign (_), but its leading
character cannot be the underscore sign. If you do not specify a variable, this command displays all
user-defined EAA environment variables.
Examples
# Display all user-defined EAA environment variables.
<Sysname> display rtm environment
Name
save_cmd
show_run_cmd
Table 54 Command output
Field
Name
Value
Value
save main force
display current-configuration
Description
Name of a user-defined EAA environment variable. This field displays a maximum of
30 characters. To display a user-defined EAA environment variable name of more
than 30 characters, use the display current-configuration command.
Value of the user-defined EAA environment variable. This field displays a maximum of
30 characters. To display a user-defined EAA environment variable value of more than
30 characters, use the display current-configuration command.
245