Snmp-Agent Trap If-Mib Link Extended - HPE FlexNetwork 7500 Series Command Reference Manual

Table 45 Standard SNMP notifications
Keyword
authentication
coldstart
linkdown
linkup
warmstart
system: Specifies system notifications sent when the system time is modified, the system reboots,
or the main system software image is not available.
Usage guidelines
To report critical protocol events to an NMS, enable SNMP notifications for the protocol. For SNMP
notifications to be sent correctly, you must also configure the notification sending parameters as
required.
If no optional parameters are specified, this command or its undo form enables or disables all SNMP
notifications supported by the device.
Examples
# Enable the SNMP agent to send SNMP authentication failure notifications.
<Sysname> system-view
[Sysname] snmp-agent trap enable standard authentication
Related commands
snmp-agent target-host

snmp-agent trap if-mib link extended

Use snmp-agent trap if-mib link extended to configure the SNMP agent to send extended
linkUp/linkDown notifications.
Use undo snmp-agent trap if-mib link extended to restore the default.
Syntax
snmp-agent trap if-mib link extended
undo snmp-agent trap if-mib link extended
Default
The SNMP agent sends standard linkUp/linkDown notifications.
Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
Extended linkUp and linkDown notifications add interface description and interface type to the
standard linkUp/linkDown notifications for fast failure point identification.
Definition
Authentication failure notification sent when an NMS fails to be authenticated by the
SNMP agent.
Notification sent when the device restarts.
Notification sent when the link of a port goes down.
Notification sent when the link of a port comes up.
Notification sent when the SNMP agent restarts.
203