Enable; Ipv6 Netstream - HPE FlexNetwork 7500 Series Command Reference Manual
Network management and monitoring
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (597 pages) ,
- Network management and monitoring command reference (430 pages) ,
- Command reference manual (376 pages)
Table of Contents
Advertisement
Field
Sampling interval
enable
Use enable to enable an IPv6 NetStream aggregation mode.
Use undo enable to disable an IPv6 NetStream aggregation mode.
Syntax
enable
undo enable
Default
No IPv6 NetStream aggregation mode is enabled.
Views
IPv6 NetStream aggregation mode view
Predefined user roles
network-admin
mdc-admin
Examples
# Enable IPv6 NetStream destination-prefix aggregation mode.
<Sysname> system-view
[Sysname] ipv6 netstream aggregation destination-prefix
[Sysname-ns6-aggregation-dstpre] enable
Related commands
ipv6 netstream aggregation
ipv6 netstream
Use ipv6 netstream to enable IPv6 NetStream on an interface.
Use undo ipv6 netstream to disable IPv6 NetStream on an interface.
Syntax
ipv6 netstream { inbound | outbound }
undo ipv6 netstream { inbound | outbound }
Default
IPv6 NetStream is disabled on an interface.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Description
Sampling rate.
This field is not supported in the current software version.
360
Advertisement
Table of Contents
