Display Rmon Eventlog - HPE FlexNetwork 7500 Series Command Reference Manual

Examples
# Display information about all RMON event entries.
<Sysname> display rmon event
EventEntry 1 owned by user1 is VALID.
Description: N/A
Community: Security
Take the action log-trap when triggered, last triggered at 0days 00h:02m:27s uptime.
Table 47 Command output
Field
EventEntry entry-number
owned by owner is status.
Description
Community
Take the action action
when triggered
last triggered at
time uptime
Related commands
rmon event

display rmon eventlog

Use display rmon eventlog to display information about event log entries.
Syntax
display rmon eventlog [ entry-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Description
Event entry owner and status:
•
entry-number—Event entry index.
•
owner—Entry owner.
•
status—Entry status:
VALID—The entry is valid.

UNDERCREATION—The entry is invalid.

The status field is not configurable at the CLI. All alarm entries created from
the CLI are valid by default.
The display rmon event command can display invalid entries, but the
display current-configuration and display this commands do not display
their settings.
Event description.
SNMP community name for the RMON event.
Actions that the system takes when the event is triggered:
•
none—Takes no action.
•
log—Logs the event.
•
trap—Sends an SNMP notification.
•
log-trap—Logs the event and sends an SNMP notification.
Last time when the event occurred, which is represented as the amount of time
that elapsed since the system startup.
216