HPE FlexNetwork 7500 Series Command Reference Manual page 424

Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command
applies to all cards. (In standalone mode.)
chassis chassis-number: Specifies an IRF member device by its member ID. If you do not specify a
member device, the command applies to all member devices. (In IRF mode.)
slot slot-number: Specifies a card by its slot number. If you do not specify a card, the command
applies to all cards. (In IRF mode.)
verbose: Displays detailed information about diagnostic tests. If you do not specify this keyword, the
command displays brief information about the diagnostic tests.
Examples
# (In standalone mode.) Display brief information about all diagnostic tests on the specified slot.
<Sysname> display diagnostic content slot 1
Diagnostic test suite attributes:
#B/*: Bootup test/NA
#O/*: Ondemand test/NA
#M/*: Monitoring test/NA
#D/*: Disruptive test/Non-disruptive test
#P/*: Per port test/NA
#A/I/*: Monitoring test is active/Monitoring test is inactive/NA
Slot 1:
Name
IPCMonitor
BoardStatusMonitor
TaskMonitor
PortMonitor
ComponentMonitor
# (In standalone mode.) Display detailed information about all diagnostic tests on the specified slot.
<Sysname> display diagnostic content slot 1 verbose
Diagnostic test suite attributes:
#B/*: Bootup test/NA
#O/*: Ondemand test/NA
#M/*: Monitoring test/NA
#D/*: Disruptive test/Non-disruptive test
#P/*: Per port test/NA
#A/I/*: Monitoring test is active/Monitoring test is inactive/NA
Slot 1:
Test name
Test attributes
Test interval
Min interval
Correct-action
Description
switch units.
Exec
Attributes
**M*PA
**M*PA
**M*PA
**M*PA
**M*PA
: IPCMonitor
: **M*PA
: 00:01:00
: 00:01:00
: -NA-
: A Real-time test, enabled by default that checks ipc between
: -NA-
Interval
00:01:00
01:00:00
00:00:10
00:00:10
00:00:30
414