Enable - HPE FlexNetwork 7500 Series Command Reference Manual
Network management and monitoring
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (597 pages) ,
- Network management and monitoring command reference (430 pages) ,
- Command reference manual (376 pages)
Table of Contents
Advertisement
Field
Created flow templates
Protocol-port outbound template
Protocol-port inbound template
Packets
Last template export time
Field count
Field type
Flows
Out packets
In packets
Out bytes
In bytes
First forwarded
Last forwarded
L4 source port
L4 destination port
PAD
Sampling interval
enable
Use enable to enable a NetStream aggregation mode.
Use undo enable to disable a NetStream aggregation mode.
Syntax
enable
undo enable
Default
No NetStream aggregation mode is enabled.
Views
NetStream aggregation mode view
Predefined user roles
network-admin
mdc-admin
Examples
# Enable NetStream destination-prefix aggregation mode.
<Sysname> system-view
Description
Number of templates that have been created.
Information of the protocol-port template in the outbound
direction.
Information of the protocol-port template in the inbound direction.
Number of packets sent by using the template.
Time when the template was last exported.
Total number of fields in a template.
Type of a field in the template.
Number of aggregate flows.
Number of sent packets.
Number of received packets.
Size of sent packets, in bytes.
Size of received packets, in bytes.
System time when the first packet was forwarded, accurate to
milliseconds.
System time when the last packet was forwarded, accurate to
milliseconds.
Source UDP or TCP port.
Destination UDP or TCP port.
Padding string.
Sampling rate.
340
Advertisement
Table of Contents
