Ssl Client-Policy - HPE FlexNetwork 7500 Series Command Reference Manual

Field
ACS information source
ACS username of most
recent connection
Connection status
Data transfer status
Most recent successful
connection attempt
Length of time before next
connection attempt
Related commands
display cwmp configuration

ssl client-policy

Use ssl client-policy to specify an SSL client policy for CWMP.
Use undo ssl client-policy to restore the default.
Syntax
ssl client-policy policy-name
undo ssl client-policy
Default
No SSL client policy is specified for CWMP.
Views
CWMP view
Predefined user roles
network-admin
mdc-admin
Parameters
policy-name: Specifies the name of an SSL client policy, a string of 1 to 31 characters.
Description
Source from which the CPE obtained the ACS URL:
•
User—ACS URL assigned by using the cwmp acs url command or by
ACS.
•
DHCP—ACS URL assigned by the DHCP server.
•
Default—ACS URL assigned by using the cwmp acs default url
command.
This field displays None if no ACS URL was available.
Username used for the most recent connection to the ACS.
This field displays Null if no ACS username was available.
Current CWMP session status:
•
Connected—A CWMP session has been established to the ACS.
•
Disconnected—No CWMP session has been established to the ACS.
•
Waiting response—The CPE is waiting for the connection response
from the ACS.
Data transfer status of the CPE:
•
Uploading—The CPE is uploading data.
•
Downloading—The CPE is downloading data.
•
None—No data is transferred.
Time of the most recent successful CWMP connection. This field displays
None if no CWMP session was established.
Amount of time (in seconds) that the CPE must wait before it initiates the next
connection. This field displays None if the CPE does not detect an event that
will trigger a connection attempt.
453