Info-Center Logging Suppress Module - HPE FlexNetwork 7500 Series Command Reference Manual

undo info-center logging suppress duplicates
Default
Duplicate log suppression is disabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
Outputting consecutive duplicate logs wastes system and network resources and increases device
maintenance costs. You can enable this feature to suppress output of consecutive duplicate logs.
Examples
# Enable duplicate log suppression on device A.
<Sysname> system-view
[Sysname] info-center logging suppress duplicates

info-center logging suppress module

Use info-center logging suppress module to configure a log suppression rule for a module.
Use undo info-center logging suppress module to delete a log suppression rule.
Syntax
info-center logging suppress module module-name mnemonic { all | mnemonic-value }
undo info-center logging suppress module module-name mnemonic { all | mnemonic-value }
Default
The device does not suppress output of any logs from any modules.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
module-name: Specifies a log source module by its name, a case-insensitive string of 1 to 8
characters. To view the list of available log source modules, use the info-center logging suppress
module ? command.
mnemonic { all | mnemonic-value }: Configures a mnemonic filter for log suppression.
•
all: Suppresses output of all logs of the module.
•
mnemonic-value: Suppresses output of logs with the specified mnemonic value. The
mnemonic-value argument is a case-insensitive string of 1 to 32 characters, which must be the
complete value contained in the mnemonic field of the log message. Log suppression will fail if
a partial mnemonic value is specified.
393