Ip Netstream; Ip Netstream Aggregation - HPE FlexNetwork 7500 Series Command Reference Manual

[Sysname] ip netstream aggregation destination-prefix
[Sysname-ns-aggregation-dstpre] enable
Related commands

ip netstream aggregation

ip netstream

Use ip netstream to enable NetStream on an interface.
Use undo ip netstream to disable NetStream on an interface.
Syntax
ip netstream { inbound | outbound }
undo ip netstream { inbound | outbound }
Default
NetStream is disabled on an interface.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Parameters
inbound: Enables NetStream for incoming traffic.
outbound: Enables NetStream for outgoing traffic.
Examples
# Enable NetStream for incoming traffic on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] ip netstream inbound
ip netstream aggregation
Use ip netstream aggregation to specify a NetStream aggregation mode and enter its view.
Use undo ip netstream aggregation to remove the configuration for a NetStream aggregation
mode.
Syntax
ip netstream aggregation { destination-prefix | prefix | prefix-port | protocol-port |
source-prefix | tos-destination-prefix | tos-prefix | tos-protocol-port | tos-source-prefix }
undo ip netstream aggregation { destination-prefix | prefix | prefix-port | protocol-port |
source-prefix | tos-destination-prefix | tos-prefix | tos-protocol-port | tos-source-prefix }
Default
No NetStream aggregation mode is specified.
Views
System view
341