NetStream commands
display ip netstream cache
Use display ip netstream cache to display NetStream entry information.
Syntax
In standalone mode:
display ip netstream cache [ verbose ] [ type { ip | ipl2 | l2 | mpls [ label-position1 label-value1
[ label-position2 label-value2 [ label-position3 label-value3 ] ] ] } ] [ destination destination-ip |
interface interface-type interface-number | source source-ip ] * [ slot slot-number ]
In IRF mode:
display ip netstream cache [ verbose ] [ type { ip | ipl2 | l2 | mpls [ label-position1 label-value1
[ label-position2 label-value2 [ label-position3 label-value3 ] ] ] } ] [ destination destination-ip |
interface interface-type interface-number | source source-ip ] * [ chassis chassis-number slot
slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
verbose: Displays detailed information about NetStream entries. If you do not specify this keyword,
this command displays brief information about NetStream entries.
type: Specifies the NetStream entry type. If you do not specify this keyword, this commands displays
information about all types of NetStream entries.
ip: Specifies Layer 3 NetStream entries.
ipl2: Specifies Layer 2 and Layer 3 NetStream entries.
l2: Specifies Layer 2 NetStream entries.
mpls: Specifies MPLS NetStream entries. This parameter is not supported in the current software
version.
label-position1 label-value1: Specifies a label by its position and value. The value range for the
label-position1 argument is 1 to 6, representing labels from the innermost to the outermost. The
value range for the label-value1 argument is 0 to 1048575.
label-position2 label-value2: Specifies a label by its position and value. The value range for the
label-position2 argument is 1 to 6, representing labels from the innermost to the outermost. The
value range for the label-value2 argument is 0 to 1048575.
label-position3 label-value3: Specifies a label by its position and value. The value range for the
label-position3 argument is 1 to 6, representing labels from the innermost to the outermost. The
value range for the label-value3 argument is 0 to 1048575.
destination destination-ip: Specifies a destination IP address in dotted-decimal notation. If you
specify this option, this command does not display Layer 2 NetStream entries.
331