Exception Filepath - HPE FlexNetwork 7500 Series Command Reference Manual

Network management and monitoring
Table of Contents

Advertisement

offset offset-size: Specifies an offset in the range of 0 to 4294967295. The default value is 128. For
example, suppose the system allocates 100 16-byte memory blocks to process job 1, and the
process has used 66 blocks. Then if you execute the display process memory heap job 1 size 16
offset 50 command, the output shows the addresses of the 51
the process.
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command
displays block address information on the active MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command displays
information for the global active MPU. (In IRF mode.)
cpu cpu-number: Specifies a CPU by its number.
Usage guidelines
The command displays memory block addresses in hexadecimal format. To view memory block
content, execute the display process memory heap address command.
Examples
# Display the addresses of 16-byte memory blocks used by process job 1.
<Sysname> display process memory heap job 1 size 16
0xb7e300c0
0xb7e30100
0xb7e30140
0xb7e30180
0xb7e301c0
0xb7e30200
# Display the addresses of 16-byte memory blocks starting from the fifth block used by process job 1.
<Sysname> display process memory heap job 1 size 16 offset 4
0xb7e30100
0xb7e30140
0xb7e30180
0xb7e301c0
0xb7e30200
Related commands
display process memory heap
display process memory heap address

exception filepath

Use exception filepath to specify the directory for saving core files.
Use undo exception filepath to remove the specified directory.
Syntax
exception filepath directory
undo exception filepath directory
Default
The default directory is the root directory of the flash: file system on the active MPU (in standalone
mode) or global active MPU (in IRF mode).
0xb7e300d0
0xb7e300e0
0xb7e30110
0xb7e30120
0xb7e30150
0xb7e30160
0xb7e30190
0xb7e301a0
0xb7e301d0
0xb7e301e0
0xb7e30210
0xb7e30220
0xb7e30110
0xb7e30120
0xb7e30150
0xb7e30160
0xb7e30190
0xb7e301a0
0xb7e301d0
0xb7e301e0
0xb7e30210
0xb7e30220
st
0xb7e300f0
0xb7e30130
0xb7e30170
0xb7e301b0
0xb7e301f0
0xb7e30230
0xb7e30130
0xb7e30170
0xb7e301b0
0xb7e301f0
0xb7e30230
294
th
through 66
16-byte blocks used by

Advertisement

Table of Contents
loading

Table of Contents