Info-Center Syslog Trap Buffersize - HPE FlexNetwork 7500 Series Command Reference Manual

Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
min-age: Sets the minimum storage period in hours. The value range is 1 to 8760.
Examples
# Set the minimum storage period to 168 hours for log files and logs in the log buffer.
<Sysname> system-view
[Sysname] info-center syslog min-age 168

info-center syslog trap buffersize

Use info-center syslog trap buffersize to set the maximum number of log traps that can be stored
in the log trap buffer.
Use undo info-center syslog trap buffersize to restore the default.
Syntax
info-center syslog trap buffersize buffersize
undo info-center syslog trap buffersize
Default
The log trap buffer can store a maximum of 1024 traps.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
buffersize: Specifies the maximum number of log traps that can be stored in the log trap buffer. The
value range is 0 to 65535. Value 0 indicates that the device does not buffer log traps.
Usage guidelines
Log traps are SNMP notifications stored in the log trap buffer. After the snmp-agent trap enable
syslog command is configured, the device sends log messages in SNMP notifications to the log trap
buffer. You can view the log traps by accessing the MIB corresponding to the trap buffer.
The default buffer size is usually used. You can adjust the buffer size according to your network
condition. New traps overwrite the oldest traps when the log trap buffer is full.
Examples
# Set the log trap buffer size to 2048.
<Sysname> system-view
[Sysname] info-center syslog trap buffersize 2048
Related commands
snmp-agent trap enable syslog
402