Snmp-Agent Context - HPE FlexNetwork 7500 Series Command Reference Manual

Default
No mapping exists between an SNMP community and an SNMP context.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
community-name: Specifies an SNMP community, a case-sensitive string of 1 to 32 characters.
context-name: Specifies an SNMP context, a case-sensitive string of 1 to 32 characters.
Usage guidelines
This command enables a module on an agent to obtain the context mapped to a community name
when an NMS accesses the agent by using SNMPv1 or SNMPv2c.
You can configure a maximum of 10 community-context mappings on the device.
Examples
# Map SNMP community private to SNMP context testcontext.
<Sysname> system-view
[Sysname] snmp-agent community-map private context testcontext
Related commands
display snmp-agent community

snmp-agent context

Use snmp-agent context to create an SNMP context.
Use undo snmp-agent context to delete an SNMP context.
Syntax
snmp-agent context context-name
undo snmp-agent context context-name
Default
No SNMP contexts exist.
Views
System view
Predefined use roles
network-admin
mdc-admin
Parameters
context-name: Specifies an SNMP context, a case-sensitive string of 1 to 32 characters.
Usage guidelines
For an NMS and an SNMP agent to communicate, configure the same SNMP context for them or do
not configure a context for the NMS.
190