Display Trill Ingress-Route; Display Trill Interface - HPE FlexFabric 5930 Series Command Reference Manual

display trill ingress-route

Use display trill ingress-route to display TRILL ingress forwarding information.
Syntax
display trill ingress-route [ vlan vlan-list ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vlan vlan-list: Specifies a space-separated list of up to 10 VLAN items. Each item specifies a VLAN
ID or a range of VLAN IDs in the form of vlan-id1 to vlan-id2. The value range for VLAN IDs is 1 to
4094. The value for vlan-id2 must be equal to or greater than the value for vlan-id1. If you do not
specify a VLAN, this command displays the TRILL ingress forwarding information for all VLANs.
Examples
# Display TRILL ingress forwarding information for all VLANs.
<Sysname> display trill ingress-route
Total number of VLANs: 1
-------------------------------------
VLAN ID:
1
List of local ports(in total: 1):
FGE1/0/2
-------------------------------------
VLAN ID:
1
Root nickname:
0x5801
List of remote ports(in total: 2):
BAGG3
BAGG4
Table 5 Command output
Field
List of local ports(in total: 1)
Root nickname
List of remote ports(in total: 2)

display trill interface

Use display trill interface to display TRILL interface information.
Description
Local ingress port list and total port number.
Nickname of root bridge in the VLAN's distribution tree.
Egress port list and total port number.
6