Display Mac-Vlan Interface - HPE FlexNetwork 5130 EI Series Command Reference Manual

dynamic : Specifies dynamically configured MAC-to-VLAN entries.
mac-address mac-address : Specifies the MAC address in the MAC-to-VLAN entry. The format
of the mac-address argument is H-H-H.
mask mac-mask : Specifies the mask for matching MAC addresses in MAC-to-VLAN entries. For
the mac-mask argument, the high-order bits must be consecutive 1s in binary notation or
consecutive Fs in hexadecimal notation. The default value is ffff-ffff-ffff.
static : Specifies statically configured MAC-to-VLAN entries.
vlan vlan-id : Specifies the VLAN in MAC-to-VLAN entries. The value range for the vlan-id
argument is 1 to 4094.
Examples
# Display all MAC-to-VLAN entries.
<Sysname> display mac-vlan all
The following MAC VLAN entries exist:
State: S - Static, D - Dynamic
MAC address
0008-0001-0000
0002-0001-0000
Total MAC VLAN entries count: 2
Table 39 Command output
Field
S - Static
D - Dynamic
MAC address
Mask
VLAN ID
Dot1q
State
Related commands
mac-vlan mac-address

display mac-vlan interface

Use display mac-vlan interface to display all ports that are enabled with the MAC-based
VLAN feature.
Syntax
display mac-vlan interface
Mask
ffff-ff00-0000
ffff-ffff-ffff
Description
Statically configured MAC-to-VLAN entries.
Dynamically configured MAC-to-VLAN entries.
MAC address of the MAC-to-VLAN entry.
MAC address mask of the MAC-to-VLAN entry.
VLAN ID of the MAC-to-VLAN entry.
802.1p priority of the VLAN in the MAC-to-VLAN entry.
State of a MAC-to-VLAN entry:
•
S—The MAC-to-VLAN entry is configured statically.
•
D—The MAC-to-VLAN entry is dynamically issued by the authentication
server.
•
S&D—The MAC-to-VLAN entry is configured both statically and
dynamically.
187
VLAN ID Dot1q
5 3
5 3
State
S
S&D