Table of Contents
Advertisement
Field
Sent
Received
display mpls ldp interface
Use display mpls ldp interface to display LDP interface information.
Syntax
display mpls ldp interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If you do not specify
an interface, this command displays information about all LDP interfaces.
Examples
# Display information about all LDP interfaces.
<Sysname> display mpls ldp interface
Interface
GE3/0/2
XGE2/0/6
Table 15 Command output
Field
Interface
MPLS
LDP
Auto-config
Related commands
mpls ldp
•
mpls ldp enable
•
Description
Number of label mappings sent and being sent.
Number of label mappings accepted.
MPLS
LDP
Enabled
Configured
Enabled
Configured
Description
Interface enabled with LDP.
Whether the interface is enabled with MPLS.
Whether the interface is configured with the mpls ldp enable command.
LDP automatic configuration information:
•
If LDP autoconfiguration is enabled, this field displays IGP process
information, such as OSPF process ID and OSPF area ID.
•
If LDP autoconfiguration is disabled, this field displays a hyphen (-).
33
Auto-config
-
-
Advertisement
Table of Contents
