Allen-Bradley Kinetix 6200 User Manual page 57

Power Rail
Bottom front view of the
double-wide IAM or AM power module.
(AM power module is shown).
Rockwell Automation Publication 2094-UM002G-EN-P - August 2016
TIP The IAM module can have two or three power rail connectors and guide
pins, the AM module can have one or two, all other modules have one.
5. Gently push the module against the power rail connectors and into the
final mounting position.
Bracket secured in slot.
6. Use 2.26 N•m (20 lb•in) torque to tighten the mounting screws.
Mounting Screws
IMPORTANT There are two mounting screws when mounting 2094-BC04-M03-M, and
2094-BC07-M05-M (double-wide) IAM modules, and 2094-BM03-M and
2094-BM05-M (double-wide) AM modules.
Repeat step 1 through step 6
your Bulletin 2094 drive system
Mount the Kinetix 6200 and Kinetix 6500 Drive System
for each AM, IPIM, shunt, or slot-filler module in
Chapter 3
IAM or AM Power Module, IPIM,
Shunt, or Slot-filler Module
(IAM power module is shown)
Bottom front view of the
single-wide AM, IPIM, shunt,
or slot-filler module
(AM power module is shown).
57