Appendix B
Upgrade the Drive Firmware
260
4. Click Add New.
The Add New RSLinx Classic Driver dialog box opens.
5. Type the new driver name.
6. Click OK.
The Configure driver dialog box opens.
7. Type the IP address.
For Kinetix 6200 drive systems, type the IP address of your Logix
Ethernet module.
For Kinetix 6500 drive systems, type the IP address of your IAM power
module.
8. Click OK.
The new Ethernet driver appears under Configured Drivers.
9. Click Close.
10. Minimize the RSLinx application dialog box.
Rockwell Automation Publication 2094-UM002G-EN-P - August 2016