Other Settings; Layer 2 Configuration - Siemens SCALANCE XC-200 Set Up And Configuration

4 Configuration file
4.3

Other settings

4.3.1

Layer 2 configuration

Higher-level functions can be configured in the basic configuration of layer 2
("Layer 2 > Configuration"). The following settings are provided for the Service
Bridge:
Layer 2 > Configuration
Figure 4-14
(1) The redundancy function is disabled with the setting "Redundancy Type": "-",
since the Service Bridge is only provided with a stub connection to the plant
bus.
(2) The "Passive Listening" function is disabled,
Protocol Data Unit) should not be forwarded.
(3) The "Loop Detection" function is enabled.
Service Bridge – Setup and Configuration
Entry ID: 109747975, V1.4, 05/2019
1
2
3
as Spanning Tree BPDUs (Bridge
50