Scalance X204Rna Tp Interfaces - Siemens SCALANCE X-200RNA Operating Instructions Manual

4.4.2

SCALANCE X204RNA TP interfaces

Connector pinout
On the SCALANCE X204RNA, the TP interfaces are implemented as RJ-45 jacks with the
MDI-X assignment (Medium Dependent Interface Autocrossover) of a network component.
Figure 4-3
Table 4-3
Pin number
Pin 8
Pin 7
Pin 6
Pin 5
Pin 4
Pin 3
Pin 2
Pin 1
Note
TP cords or TP-XP cords with a maximum length of 10 m can be connected to the RJ-45 TP
port.
With the IE FC cables and IE FC RJ-45 plug 180, an overall cable length of up to 100 m is
permitted between two devices depending on the cable type.
Note
The interfaces of the SCALANCE X204RNA meet the requirements for environment B
according to IEEE 802.3, section 33.4.1.1.
SCALANCE X-200RNA
Operating Instructions, 10/2016, C79000-G8976-C342-04
RJ-45 jack
Pin assignment
Descriptions of the products
4.4 SCALANCE X204RNA
Assignment
n. c.
n. c.
TD-
n. c.
n. c.
TD+
RD-
RD+
35