05.08
9.1
HMI screens and softkeys
Configuring safety–related functions
When selecting "Commissioning/NC/Safety–Integrated" you reach the starting
screen for the Safety Integrated commissioning support. The following screen is
displayed 9-1:
Fig. 9-1
View of the axes (horizontal softkey)
Softkey "safe axes"
All of the axes are listed in this screen that were activated for Safety Integrated.
Softkey "All axes"
Here, defined axes are listed independent of whether it involves a safety axis or
not.
Softkey "Copy SI data"
When the softkey is pressed, all NC machine data, relevant for the SI functions, is
transferred into the corresponding drive parameters.
© Siemens AG 2008 All Rights Reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 05.2008 Edition
Example for "Commissioning/NC/Safety–Integrated" for 840D sl
Commissioning
9.1 HMI screens and softkeys
9-391