Siemens SINUMERIK 840D sl Function Manual page 348

Data Description
8.2 Parameters for SINAMICS S120
r9739[0...1] SI motion, diagnostics result list 7
Displays result list 7 where for a crosswise data comparison with the control,
led to an error.
[0]: Result list second channel
[1]: Result list drive
Bit field
Bit 00 Actual value > Upper limit SN25+
Bit 01 Actual value > Lower limit SN25+
Bit 02 Actual value > Upper limit SN25–
Bit 03 Actual value > Lower limit SN25–
Bit 04 Actual value > Upper limit SN26+
Bit 05 Actual value > Lower limit SN26+
Bit 06 Actual value > Upper limit SN26–
Bit 07 Actual value > Lower limit SN26–
Bit 08 Actual value > Upper limit SN27+
Bit 09 Actual value > Lower limit SN27+
Bit 10 Actual value > Upper limit SN27–
Bit 11 Actual value > Lower limit SN27–
Bit 12 Actual value > Upper limit SN28+
Bit 13 Actual value > Lower limit SN28+
Bit 14 Actual value > Upper limit SN28–
Bit 15 Actual value > Lower limit SN28–
Bit 16 Actual value > Upper limit SN29+
Bit 17 Actual value > Lower limit SN29+
Bit 18 Actual value > Upper limit SN29–
Bit 19 Actual value > Lower limit SN29–
Bit 20 Actual value > Upper limit SN30+
Bit 21 Actual value > Lower limit SN30+
Bit22 Actual value > Upper limit SN30–
Bit23 Actual value > Lower limit SN30–
See also: C01711
Unit: Default value:
– –
r9744 SI message buffer changes, counter
Displays the changes of the safety message buffer. This counter is increm-
ented every time that the safety message buffer changes.
This is used to check whether the safety message buffer has been read out
consistently.
See also r9747, r9748, r9749, p9752, r9754, r9755, r9756, r9759
Unit: Default value:
– –
r9747[0...63] SI message code
Displays the number of the safety messages that have occurred.
See also r9744, r9748, r9749, r9754, p9752, r9753, r9754, r9755, r9756, r9759
Unit: Default value:
– –
8-348
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 05.2008 Edition
Minimum value: Maximum value:
– –
Minimum value: Maximum value:
– –
Minimum value: Maximum value:
– –
Checksum:
Protection level:
Yes
3
Data type: Effective:
POWER ON
Unsigned32
Checksum:
Protection level:
–
3
Data type: Effective:
Unsigned16 –
Checksum:
Protection level:
–
3
Data type: Effective:
Unsigned16 –
© Siemens AG 2008 All Rights Reserved
05.08