Siemens SINUMERIK 840D sl Function Manual page 453

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Bit selection, trace 2... to trace 4...

A similar procedure is also obtained for trace 2.. to trace 4 that, in this particular

example, contains the following signals:

The handling is the same as described under bit selection, trace 1.

Mixing traces...

Using the vertical softkey "Mix traces...", the user can select individual bits of SI

signals from 4 traces and display these in the tracks as bit graphics for comparison

purposes. This means that especially inputs and outputs of various SI signals can

be combined.

Result of the bit selection

SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 05.2008 Edition

SGE drive (from PLC)

SG drive (from PLC)

10.1 Troubleshooting procedure

Sinamics s120