Siemens SINUMERIK 840D sl Function Manual page 417

05.08
Fig. 9-13
– Acknowledge with OK
The hardware configuration is now displayed, can be printed and then subse-
quently checked.
Effect of the acceptance test for specific measures
Table 9-1 Scope of the acceptance test depending on specific measures
Measure
The encoder system
has been replaced
(refer to Chap. 9.6)
Replace an SMC,
SME module
(refer to Chap. 9.6)
© Siemens AG 2008 All Rights Reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 05.2008 Edition
Print preview, Step 7
Documentation Function test
Part 1
No No
Supplement, No
hardware data/
configuration/
software version
data
Commissioning
9.5 Acceptance test
Function test
Part 2 completion
check of safe ac- Supplement,
tual values and possibly new
function of SE/SN checksums and
(axis–specific) counter–signature
check of safe ac- Supplement,
tual values and possibly new
function of SE/SN checksums and
(axis–specific) counter–signature
Report
9-417