Siemens SINUMERIK 840D sl Function Manual page 397

05.08
Displaying the Safety MD and selected MD on a split screen
Using the softkey "MD selection", "SI–MD" and "SI + MD selection", it is possible to
toggle between selected machine data relevant to SI, SI machine data, and a win-
dow split in two – in which both SI data as well as also selected machine data can
be displayed.
Fig. 9-7
General MD
The general machine data is listed here and can be changed.
Axis MD
The axis machine data are listed here and can be changed.
Drive parameters
The drive parameters are listed here and can be changed.
Control Unit MD
The Control Unit parameters are listed here and can be changed.
© Siemens AG 2008 All Rights Reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 05.2008 Edition
Softkey "General MD" for 840D sl
Commissioning
9.1 HMI screens and softkeys
9-397