Siemens SINUMERIK 840D sl Function Manual page 488

Diagnostics
10.2 NCK safety alarms for SINUMERIK 840D sl
10-488
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 05.2008 Edition
205
Cam track assignment: The setting in MD 36938
$MA_SAFE_CAM_TRACK_ASSIGN[10] does not correspond with the
associated drive parameter assignment.
Remedy
Cam track assignment SN11. Enter the same MDs and check the cam
enable and cam parameterization
206
Cam track assignment: The setting in MD 36938
$MA_SAFE_CAM_TRACK_ASSIGN[11] does not correspond with the
associated drive parameter assignment.
Remedy
Cam track assignment SN12. Enter the same MDs and check the cam
enable and cam parameterization
207
Cam track assignment: The setting in MD 36938
$MA_SAFE_CAM_TRACK_ASSIGN[12] does not correspond with the
associated drive parameter assignment.
Remedy
Cam track assignment SN13. Enter the same MDs and check the cam
enable and cam parameterization
208
Cam track assignment: The setting in MD 36938
$MA_SAFE_CAM_TRACK_ASSIGN[13] does not correspond with the
associated drive parameter assignment.
Remedy
Cam track assignment SN14. Enter the same MDs and check the cam
enable and cam parameterization
209
Cam track assignment: The setting in MD 36938
$MA_SAFE_CAM_TRACK_ASSIGN[14] does not correspond with the
associated drive parameter assignment.
Remedy
Cam track assignment SN15. Enter the same MDs and check the cam
enable and cam parameterization
210
Cam track assignment: The setting in MD 36938
$MA_SAFE_CAM_TRACK_ASSIGN[15] does not correspond with the
associated drive parameter assignment.
Remedy
Cam track assignment SN16. Enter the same MDs and check the cam
enable and cam parameterization
211
Cam track assignment: The setting in MD 36938
$MA_SAFE_CAM_TRACK_ASSIGN[16] does not correspond with the
associated drive parameter assignment.
Remedy
Cam track assignment SN17. Enter the same MDs and check the cam
enable and cam parameterization
© Siemens AG 2008 All Rights Reserved
05.08