Module Type (Nck) - Siemens SINUMERIK 840D sl Function Manual

05.08
SPL--SGA ($A_OUTSE/OUTSEP)
MD: ...OUT_ASSIGN[3]
Filter setting
MD: ...OUT_FILTER[3]
F net data
of the F--DO module
MD: ..._OUT_ADDRESS[3]
Fig. 7-20 Selecting the SPL--SGA for filtering
7.2.8

Module type (NCK)

The F module type cannot be explicitly specified. The F master determines the
type depending on the machine data in which a PROFIsafe address has been
entered:
S $MN_PROFISAFE_IN_ADDRESS
S $MN_PROFISAFE_OUT_ADDRESS
Dependent on this, the F module is identified as either input, output or bidirectional
I/O modules.
Table 7-2
..._IN_ADDRESS
F address
F address
7.2.9 Parameterizing the F master (PLC)
In the PLC, the F master does not have to be explicitly parameterized regarding
the connection of F modules.
The PLC is parameterized explicitly as follows:
S Parameterizing the NCK
S Generating and downloading the configuration
© Siemens AG 2008 All Rights Reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) - - 05.2008 Edition
32
10101010 10101010 10101010 10101010
Bit31
00000000 00000000
Bit31
Sub--slot[1]
00000000 00000000
F module types
..._OUT_ADDRESS
--
Connecting Sensors/Actuators
7.2 Connecting I/O via PROFIsafe
0001000000110001
Sub--slot[0]
00010000 00010000
--
Input module
F address Output module
F address Input/output module
1
Bit0
Bit0
Type
7-217